Predictive maintenance platform · In development

Know which machine will fail before it stops your line.

Veyroniq reads vibration, temperature, pressure and maintenance history to flag abnormal machine behaviour, estimate when a failure is likely and tell your maintenance team what to fix first.

Line 3 · Filling & capping Sample data

Assets

P-204 Transfer pump62
M-311 Drive motor91
G-118 Conveyor gearbox84
C-402 Air compressor38
F-207 Exhaust fan88

P-204 · Vibration velocity (mm/s RMS)

Streaming
Vibration5.8mm/s
Bearing temp71.4°C
Discharge pressure4.2bar
Runtime since service2,140h

Forecast

Drive-end bearing wear

Likely failure window18–26 days

Recommended: replace drive-end bearing at the planned stop on Line 3. Check shaft alignment.

Multi-signal analysis

Vibration, temperature, pressure and service history read together, not in isolation.

Failure-window forecasts

An estimated time range for likely failure, so work fits planned stops.

Ranked recommendations

What to inspect or replace first, by risk to production.

Downtime analytics

Where lost hours come from, by asset, line and cause.

The problem

Most maintenance is still either too late or too early.

Run-to-failure means a stopped line, emergency parts and overtime. Calendar-based servicing replaces components that still had months of life, and still misses failures that develop between inspections.

Reactive

Fix it when it breaks

  • Unplanned stops mid-shift
  • Expedited parts and call-out labour
  • Secondary damage to connected equipment
  • Scrap and missed orders
Preventive

Service it on a schedule

  • Parts replaced with useful life left
  • Planned work that wasn't needed
  • Failures still slip between intervals
  • Inspection rounds that don't scale
Predictive with Veyroniq

Service it when the data says so

  • Early warning from changing machine behaviour
  • Work planned into scheduled stops
  • Parts ordered ahead of need
  • Technicians sent to the highest-risk asset first
Food processing

A refrigeration compressor during peak production

A failing compressor can force product to be held or discarded. Rising discharge temperature and vibration often show weeks before it trips.

Mining

A conveyor gearbox on the main haul line

One gearbox failure can idle the whole circuit. Gear-mesh vibration and oil temperature trends show wear long before teeth break.

Oil & gas

A transfer pump seal at a remote site

Seal leaks bring safety, environmental and travel costs. Pressure fluctuations and bearing temperature give advance notice.

Platform

From sensor signal to scheduled work order.

Five capabilities in one workflow: monitor every asset, detect what's abnormal, forecast what it means, recommend the fix and measure the result.

01

Predictive Maintenance & Failure Forecasting

Machine learning models trained on sensor trends and past failures estimate a likely failure window for each monitored component, with a confidence range.

Outcome: maintenance planners can move work into planned shutdowns instead of reacting to breakdowns.

Failure threshold Today 18–26 d Health index · P-204 drive-end bearing (sample)
02

Real-Time Machine Health Monitoring

Every connected asset gets a live health score built from its sensor readings and operating context, shown by line, area and site.

Outcome: supervisors see the state of the floor at a glance, without walking it or reading raw tags.

Line 1MPGFC
Line 2MPGMF
Line 3PMGCF
UtilitiesCPBFP
HealthyWatchActOffline
03

AI-Powered Anomaly Detection

Models learn each machine's normal behaviour across load and speed, then flag readings and combinations of readings that drift away from it, even when no single value has crossed a fixed alarm.

Outcome: earlier warnings with fewer nuisance alarms than static thresholds.

Vibration
Bearing temp
Pressure
Anomaly score 0.87Correlated rise in vibration and bearing temperature at constant load
04

Intelligent Maintenance Recommendations

Each alert becomes a plain-language recommendation: the likely fault, what to check, the parts usually needed and the time it typically takes, drawing on the asset's own maintenance history.

Outcome: technicians arrive knowing what to look for, with the right parts.

REC-0417 · C-402 Air compressorPriority 1

Likely cause: inlet valve wear causing overheating

  1. Inspect inlet valve and seat for wear
  2. Check intercooler for fouling
  3. Verify discharge temperature after service
PartsValve kit, gasket set
Est. duration3.5 h
Last similar work14 months ago
05

Equipment Downtime & Performance Analytics

Track downtime, availability, mean time between failures and maintenance effort by asset, line and failure cause, and see which equipment costs the most production time.

Outcome: reliability and capital planning grounded in the plant's own data.

Downtime by cause · last 90 days (sample)

Bearing failure41 h
Seal leakage28 h
Motor overheating19 h
Belt / coupling13 h
Electrical8 h

How it works

Four steps from machine to decision.

  1. 01

    Connect equipment

    Sensor data from vibration, temperature and pressure sensors is streamed from the plant, alongside asset lists and maintenance records.

  2. 02

    Learn normal behaviour

    Readings are stored, cleaned and aligned with operating context, and baseline models are built for each asset.

  3. 03

    Detect and forecast

    New data is scored continuously for anomalies, and degrading components get an estimated failure window.

  4. 04

    Recommend and act

    Maintenance teams receive ranked recommendations, schedule the work and close the loop by recording what they found.

Interactive demo

Explore a sample plant workspace.

A working front-end prototype of the Veyroniq interface with fictional data for a packaging plant. Open assets, inspect sensor trends, acknowledge alerts and schedule recommended work.

Ridgeway Packaging · Plant 2Sample workspace
Sample data

All companies, assets, readings and forecasts in this demo are fictional sample data generated in your browser. Nothing is sent or stored.

Technology

Proposed architecture on AWS

Veyroniq is being designed as an event-driven platform on AWS. The services below make up the proposed production architecture for the product currently in development. None are described here as already running.

Plant
Machine sensorsVibration, temperature, pressure
Maintenance recordsHistory, work orders, parts
Ingest
AWS IoT CoreSecure device connectivity and telemetry ingestion
AWS LambdaValidation, routing and event processing
Store
Amazon S3Raw and historical sensor data, model training sets
Amazon DynamoDBAssets, health scores, alerts, recommendations
Intelligence
Amazon SageMakerAnomaly detection and failure-forecasting models
Amazon BedrockPlain-language recommendations from alerts and history
AWS services and their roles
ServiceRole in VeyroniqStatus
AWS IoT CoreConnects plant gateways and ingests machine telemetryProposed
AWS LambdaProcesses incoming readings, triggers scoring and alert workflowsProposed
Amazon S3Stores raw sensor history and datasets for model trainingProposed
Amazon DynamoDBHolds asset records, health scores, alerts and recommendationsProposed
Amazon SageMakerTrains and hosts anomaly-detection and failure-forecasting modelsProposed
Amazon BedrockGenerates maintenance recommendations and summarises asset historyProposed

Explainable alerts

Every alert shows which signals changed and by how much, so engineers can check the reasoning.

People make the call

Recommendations support maintenance teams; they don't trigger equipment actions automatically.

Plant data stays separate

Each customer's data is designed to be isolated and encrypted in transit and at rest.

Scales with assets

Serverless, event-driven processing grows with the number of connected machines.

Industries

Built for operations where downtime is expensive.

Manufacturing

Motors, gearboxes, pumps and conveyors on production lines.

Industrial production facilities

Continuous-process equipment where a single stop affects the whole plant.

Food processing

Refrigeration, mixers, fillers and packaging lines with strict hygiene schedules.

Mining

Crushers, conveyors, pumps and haulage support equipment in harsh conditions.

Oil & gas

Pumps, compressors and rotating equipment at plants and remote sites.

Factory maintenance departments

Prioritised work queues and fewer emergency call-outs.

Industrial engineering companies

Condition insight across the equipment you design, install or service.

Industrial equipment operators

Fleet-wide health visibility for rented or operated machinery.

Product status

Where Veyroniq is today.

Veyroniq is in initial product development. The demo on this page is an interactive prototype; the data pipeline and models are being built on the proposed AWS architecture.

Current

Design and prototype

  • Product workflow and dashboard design
  • Interactive prototype with sample data
  • AWS architecture definition
Next

Core platform build

  • Telemetry ingestion and storage
  • First anomaly-detection models
  • Working sessions with early-access plants
Then

Early access release

  • Failure forecasting on customer assets
  • Maintenance recommendations
  • Pricing set with early-access customers

Early access

Bring a production line. We'll bring the models.

We're looking for maintenance and reliability teams willing to share equipment data and feedback as Veyroniq is built. Early-access teams get:

  • Working sessions on your own equipment and failure history
  • Direct input into alerts, forecasts and recommendations
  • Priority onboarding when the platform opens

Pricing

Pricing has not been set yet. It will be agreed with early-access customers, based on the number of monitored assets.

Or email fawaz@veyroniq.site

Company

About Veyroniq

Veyroniq is an industrial AI software company founded in 2026. It is building a predictive maintenance platform that helps manufacturers and industrial operators prevent unexpected equipment failures and reduce production downtime.

Founded
2026
Category
Industrial AI · Predictive maintenance SaaS
Stage
Building initial product
Company type
Privately held

Fawaz Adekilekun

Founder

fawaz@veyroniq.site

FAQ

Common questions

Is Veyroniq available today?

Veyroniq is in initial product development. The demo on this page is an interactive prototype using sample data. Maintenance teams can request early access to take part as the platform is built.

What data does it need?

Readings from vibration, temperature and pressure sensors, a list of assets, and maintenance history such as past work orders and failures. Supported data sources and connection methods will be confirmed with early-access teams.

Do we need new sensors?

Not necessarily. Many plants already collect useful readings. Where coverage is missing, adding sensors to critical assets will be discussed during onboarding.

Does the AI control our equipment?

No. Veyroniq detects, forecasts and recommends. Maintenance teams decide what to do and when, and nothing changes how machines operate.

Where will our data be stored?

The proposed architecture stores data on AWS, with each customer's data isolated and encrypted. Hosting regions will be confirmed with early-access customers.